# The audio app for iPhone and iPad

> Source: https://listen.365ui.com/guide/iphone/en
>
> A room with no mixer and no laptop: the mic’s receiver plugs into an iPhone or iPad, and our app sends the sound.

Languages: [中文](https://listen.365ui.com/guide/iphone/zh) · **English**

[All guides](https://listen.365ui.com/en#guides)

## When to use the app

- A room where speakers wear a wireless lavalier and nobody wants to bring a laptop: the receiver plugs into an iPhone or iPad, and our app **365UI Interpretation Audio** sends the sound. Browsers on an iPhone or iPad cannot record an external mic, so this setup needs the app.
- The room can be any size, as long as speakers wear the mics. The cautions are those of every room on mics: audience questions need a mic handed over, or the host repeats them; one DJI receiver takes up to 4 transmitters.
- With only the phone’s own microphone, the app and a browser both work. A browser needs nothing installed; the app keeps going with the screen locked or another app in front, notifies you when a phone conversation takes the microphone, and reconnects by itself after the network drops. An iPhone’s microphone is at the bottom, an iPad’s on the top edge (the camera end): point that end at the speaker and keep a case from covering it.
- A room with a sound system, where the microphones go into the venue mixer, still takes the mixer and a laptop; follow the venue helper guide. That way the stage and audience-question microphones all come in.

## Installing the app and plugging in the mic

- Search the App Store for **365UI Interpretation Audio**, or use the App Store link at the foot of this page, and install **365UI Interpretation Audio** (the home screen shows it as 365UI Audio). It is free, needs no account, and runs on iOS 17 or later.
- Plug the receiver into the iPhone or iPad: straight in on a USB-C port; a Lightning port needs the mic maker’s Lightning adapter. Set the receiver to mono (M mode on a DJI).
- Bluetooth mics and headsets cannot be used: they run at telephone quality and a phone conversation takes them away, so the app refuses them.
- To check that the mic is recognised first, tap “Try a microphone first (offline)”: choose an input, and a bar that moves when someone speaks means it is. Nothing goes online and no sound leaves the phone, so you can try it at home before the event.

- **DJI Mic 3 Mobile Phone Adapter (Lightning)** (About $19): Needed only when the receiver plugs into an iPhone or iPad with a Lightning port and our app 365UI Interpretation Audio sends the sound, one per room; an iPhone or iPad with USB-C, or a laptop, does not need it. It fits the DJI Mic 3 only; for another mic, buy its own maker’s Lightning adapter. — [amazon.com/dp/B0F98TG92R](https://www.amazon.com/dp/B0F98TG92R)

## Getting started

- Open the app, tap “Scan the audio QR code” and scan this room’s audio QR code on the event page; with only the link at hand, tap “Paste the audio link”.
- The first time, it asks for the camera and the microphone: allow both. Allow notifications too; that is how it tells you when something takes the microphone.
- Choose the receiver in the list (a DJI shows as Wireless Mic Rx), or the phone’s own microphone. If the bar moves when someone speaks, tap “Start with this”.
- Soundcheck: have a speaker say a sentence into the mic, and sending starts by itself once it is loud enough; if nobody can speak right now, tap “Skip the check and start sending”.
- A green screen saying the remote hears you clearly means it is working.

## During the session

- You can lock the screen or switch to another app and it keeps listening. **Don’t swipe this app away.**
- **Keep the phone charging**: through the receiver’s charging port, or on a wireless charger. An iPad has no wireless charging, so power it through the receiver’s charging port.
- While it sends, don’t take phone conversations, record video or send voice messages on this phone: they take the microphone and the audience hears nothing until they end, when the app picks up again by itself, no taps needed. The app notifies you if this happens while it is not on screen.
- If the receiver is knocked out, the app sends silence and never falls back to the phone’s own microphone; plug it back in and it resumes, no taps needed.
- If the network drops or changes, the app reconnects by itself. If the screen says the room cannot be joined, swipe the app away, open it again and tap “Go back to the last room”.
- For a break tap “Start a break (pause interpretation)”, and “Break over, carry on” before speakers resume; tap “Stop sending” when the meeting is over.
- An audio link sends from one device at a time: opened on another device, this one stands down and stops sending.

## See also

- [Open 365UI Interpretation Audio in the App Store](https://apps.apple.com/app/365ui-interpretation-audio/id6834849574)
- [Venue helper guide](https://listen.365ui.com/guide/helper)
- [Privacy notice](https://listen.365ui.com/privacy)
